![]() ![]() However, there is the possibility of switching the backlight on and off via command line, should the display currently not be needed. Unfortunately, it is not possible to connect the display after starting the Pi, as it must already be connected and powered up at startup. ![]() Option "EmulateThirdButtonMoveThreshold" "30"Īfter the restart, a long click should look like this: ![]() MatchProduct "FT5406 memory based driver" In this case, pressing the touchscreen for a longer time in one place triggers the same effect as right-clicking on that location.įor this, we have to edit a file sudo nano /etc/X11/nfĪnd insert the following content: Section "InputClass" If you use the touchscreen without a mouse and keyboard, you will definitely miss the right-click function. The following is written at the end of the file: lcd_rotate=2Īfter the restart, the image should now be rotated by 180 ° and you can turn the display over, which puts the micro USB connector on top.Īlternatively, there are the following options: display_rotate=0 # Normal It only needs to be specified for one file sudo nano /boot/config.txt ![]() Luckily, there is the possibility to rotate the picture automatically. So if you do not have a 90 degree USB cable, it will be difficult to set up the display vertically. One point that initially bothered me a bit is that the micro USB entrance for the power supply is on the bottom of the display. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |